A mid-capacity option for full-range programmes
Distributors building a sodium-ion starter range usually need three steps, not two. The 50Ah class is the middle step of this range: a 12V 50Ah unit in a 230 × 175 × 181 mm case, sitting between the 30Ah and 75Ah classes in capacity.
12V 50Ah specification
| Model class | 12V 50Ah |
|---|---|
| Chemistry | Sodium-ion |
| Case size | 230 × 175 × 181 mm |
Where the 50Ah sits in the parc
A range with only a compact class and a heavy class leaves a gap in the middle of its own line-up. The 50Ah class fills that step: a mid-capacity 12V starter battery whose case size — 230 × 175 × 181 mm — is the figure to work from when you map it against your parc.
When you map your parc, work from case groups outward: list the vehicles by the battery tray they carry, note the terminal layout each group needs, and the classes assign themselves. It is slower than guessing from engine size alone, and it is the reason some programmes fit first time and others spend a season on returns. The case group matters more than the badge on the old battery: two cars with the same engine can carry different trays, and the 230 × 175 × 181 mm figure is the one to check against yours before a class is assigned.
Specifying the 50Ah in writing
This model is a 12V 50Ah-class starter battery in a 230 × 175 × 181 mm case. For a programme, the figures that matter are the ones your vehicles draw: measure the cranking load and the standby drain across your own parc, and send both with the inquiry — the quotation is then worked against your figures, not a class average.
Take a sample unit, run it on your vehicles and your cold bench, and let the measured results decide the programme order. It is one extra step, and it is the step that keeps a mid-band model honest.
The middle class in a coverage plan
With the 50Ah stocked, the starter range runs in four capacity steps: 30Ah, 50Ah, 75Ah and 230Ah. Each step is the same chemistry and the same supplier paperwork, which is what makes the range easy for a distributor's sales team to explain and easy for a fleet to standardise on.
OEM labelling is available on this model, so the middle step can carry your brand exactly like the core models above and below it — one wall, one brand, four steps.
What to send with the inquiry
Three things make a 50Ah quotation fast: the vehicle list or case groups you are targeting, the quantity per order you are planning, and the destination market. With those, the reply can confirm the build specification, the labelling options and the commercial terms in one pass, instead of trading questions for a week.
The 50Ah sample route
Plan the sample evaluation when you inquire: the vehicles, the cold test if your market needs one, and the measurements you will record. On a mid-band class like this one, the sample is where a programme's figures come from — measure it against your own vehicles before the volume order.
Ordering the 50Ah
Check the case dimensions against the vehicles you are targeting. Samples and OEM labelling can be arranged — send the quantity and destination market with your inquiry.
Wholesale inquiries
Tell us the model, your quantity and your market — we reply with a quotation and lead time.